Interface Cable; Connecting Interface Cable - 3Com 3C13701 Module Manual

3Com Router 5000 and Router 6000 v2.41
Module Guide
Figure 2-29 Router 2-Port FXS SIC panel
Figure 2-30 Router 2-Port FXO SIC panel
The status description of the LEDs of Router 1-Port FXS/FXO SIC and Router 2- Port
FXS/FXO SIC is shown in the following table:
Table 2-17 Description of the LEDs on Router 1-Port FXS/FXO SIC and Router 2-Port FXS/FXO SIC
panels
LINK
ACT

2.7.5 Interface Cable

Connection cables for Router 1-Port FXS/FXO SIC and Router 2- Port FXS/FXO SIC
are telephone cables with ferrite core. Both ends of the cables are RJ11 connectors.
For cable pinouts, see Low-End and Mid-Range Series Routers Cable Manual.
Caution:
The standard shipment package of Router 1-Port FXS/FXO SIC and Router 2-Port FXS/FXO SIC
includes a ferrite core telephone cable.

2.7.6 Connecting Interface Cable

LED
OFF means the link is idle. ON means the link is being occupied for call
connection.
OFF means the link is idle. ON means the link is being occupied for
communication.
Chapter 2 Smart Interface Cards
Description
2-28