Router 1-Port Gigabit Ethernet Fiber Fic; Introduction; Interface Attributes; Panel And Interface Leds - 3Com 3C13701 Module Manual

3Com Router 5000 and Router 6000 v2.41
Module Guide

4.4 Router 1-Port Gigabit Ethernet Fiber FIC

4.4.1 Introduction

The 1-port 1000Base-SX/1000Base-LX GE fiber interface card, is used for
router-to-LAN communication.
The cards support:
Operation at 1000 Mbps
Full duplex

4.4.2 Interface Attributes

The following table describes the interface attributes of the 1-Port GIGABIT
ETHERNET FIC/FIC-2GEF:
Table 4-7 Interface attributes of the 1-Port GIGABIT ETHERNET FIC
Attribute
Connector
Number of
interfaces
Interface standard
Optical
transmitt
er
power
Receiver sensitivity
Central wavelength
Fiber type
Max. transmission
segment
Operating mode

4.4.3 Panel and Interface LEDs

The following figures illustrate the 1-Port GIGABIT ETHERNET FIC panel:
1-Port GIGABIT ETHERNET FIC
1
Multi-mode
Type short-haul
(850 nm)
Min. -9.5 dBm
Max. 0 dBm
-17 dBm
850 nm
62.5/125 μm
multi-mode
0.55 km
(0.34 mi.)
Chapter 4 Flexible Interface Cards (Router 6000)
Single-mode
Long-haul
medium-haul
(1310 nm)
(1310 nm)
-9 dBm -2 dBm
-3 dBm 5 dBm
-20 dBm -23 dBm
1310 nm 1310 nm
9/125 μm 9/125 μm
single mode single mode
10 km (6.21 40 km (24.86
mi.) mi.)
4-9