Panel And Interface Led; Interface Cable - 3Com 3C13701 Module Manual

3Com Router 5000 and Router 6000 v2.41
Module Guide
Supported service

4.14.3 Panel and Interface LED

The following figure illustrates the Router 1-Port ADSL FIC panel.
Figure 4-43 Router 1-Port ADSL FIC panel
The following figure illustrates the Router 2-Port ADSL FIC panel.
Figure 4-44 Router 2-Port ADSL FIC panel
The following table describes the LEDs on the card panels.
Table 4-30 LEDs on the Router 1/2-Port ADSL FIC panel
LED
LINK
ACT

4.14.4 Interface Cable

The interface cables that the Router 1/2-Port ADSL FIC uses are regular telephone
cables.
ADSL over the regular telephone line
OFF means the loop is inactive; ON means the loop has been activated and has entered
the data mode; blinking means the loop is being activated.
OFF means no data is being transmitted or received on the interface and blinking means
data is being transmitted and/or received.
Chapter 4 Flexible Interface Cards (Router 6000)
Description
4-46