Changing The Cem Password - Cisco Aironet 340 Series Installation And Configuration Manual

Using Static WEP
Step 2 Decide which existing static WEP key you want to overwrite.
Step 3 Click within the blank field of that key.
Step 4 Enter a new key, following the guidelines outlined in
Enabling Static WEP" section on page
Step 5 Make sure the Transmit Key button to the left of your key is selected, if you want this key to be used to
transmit packets.
Step 6 Click OK to write your new static WEP key to the client adapter's volatile memory and the Windows
CE registry and to exit the utility or click Cancel to exit the utility without overwriting any keys.
Step 7 Open ACU and make sure WEP is enabled.

Changing the CEM Password

Follow the steps below if you want to change the password that allows you to access CEM.
Note
Step 1 Double-click the Cisco CEM icon or select Start > Programs > Cisco > Client Encryption Manager.
Step 2 Enter the correct password in the Enter Password screen (see
appears (see
Step 3 Click the Change Password button. The Change Password screen appears (see
Figure 4-7
Step 4 Enter the current password in the Existing Password field.
Enter a new password in the New Password field.
Step 5
Note
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
4-10
For security reasons, Cisco recommends that you change the default password.
Figure 4-6).
Change Password Screen
Passwords are case sensitive and can contain up to 256 alphanumeric characters.
Step 3 of the
4-7.
Figure
Chapter 4 Enabling Security Features
"Entering a New Static WEP Key and
4-2) and click OK. The CEM screen
Figure 4-7).
OL-1375-02