Explosive Gas Precautions; Precautions When Working With Batteries - Xantrex XW4024-120 Operation Manual

Safety

Explosive gas precautions

Precautions When Working With Batteries

vi
WARNING: Explosion hazard
1. Working in the vicinity of batteries may be dangerous. Batteries can generate
explosive gases during normal operation. Therefore, you must read this guide
and follow the instructions exactly before installing or using your XW
Inverter/Charger.
2. To reduce the risk of battery explosion, follow these instructions and those
published by the battery manufacturer and the manufacturer of the equipment
in which the battery is installed.
WARNING: Explosion or fire hazard
1. Follow all instructions published by the battery manufacturer and the
manufacturer of the equipment in which the battery is installed.
2. Make sure the area around the battery is well ventilated.
3. Never smoke or allow a spark or flame near the engine or batteries.
4. Use caution to reduce the risk of dropping a metal tool on the battery. It could
spark or short circuit the battery or other electrical parts and could cause an
explosion.
5. Remove all metal items, like rings, bracelets, and watches when working with
batteries. Batteries can produce a short circuit current high enough to weld
metal to skin, causing a severe burn.
6. Have someone within range of your voice or close enough to come to your aid
when you work near a battery.
7. Have plenty of fresh water and soap nearby in case battery acid contacts skin,
clothing, or eyes.
8. Wear complete eye protection and clothing protection. Avoid touching your
eyes while working near batteries.
9. If battery acid contacts skin or clothing, wash immediately with soap and
water. If acid enters your eye, immediately flood it with running cold water
for at least twenty minutes and get medical attention immediately.
975-0240-01-01