Fault Messages - Xantrex XW4024-120 Operation Manual

Fault Messages

975-0240-01-01
When the XW Inverter/Charger detects a fault condition, the fault is displayed on
the System Control Panel. The XW Inverter/Charger also illuminates the Fault
light on the System Control Panel and inverter information panel. A fault affects
the operation of the unit. See "Fault Types" on page 4–16 for an explanation of the
different fault types.
You can view the 20 most recent fault messages on the System Control Panel by
selecting Fault Log from the Device Info menu in the XW Inverter/Charger Setup
Menu.
If several faults occur before you can acknowledge or clear them, they are
displayed together on a fault list. This list contains messages from every Xanbus-
enabled device, not just the XW Inverter/Charger. You can select a message and
view its details from the fault list.
To view a message from a fault list:
1. On the list, use the up arrow or down arrow button to highlight the message
you want to view.
2. Press Enter.
The complete message appears.
After viewing the message, you can return to the fault list by pressing Exit or
continue to the menu for the device that caused the fault by pressing Enter. Each
time you return to the list after viewing a complete message, the viewed message
is removed from the list.
If you have left the fault list, you can view faults at any time from the System
Settings menu.
To view a fault list:
1. On the Select Device menu, highlight System Settings and press Enter.
2. On the System Settings menu, highlight View Fault List.
3. Press Enter.
Faults and Warnings
4–15