Using The Xw System Control Panel; Xw Inverter/Charger Setup Menu - Xantrex XW4024-120 Operation Manual

Configuration

Using the XW System Control Panel

XW Inverter/Charger Setup Menu

3–2
The XW Inverter/Charger is configured using the XW System Control Panel. The
System Control Panel provides access to settings relating to AC input and output,
battery charging, and grid-tie operation.
WARNING: Risk of fire and shock hazard
The following information is for qualified installation/service personnel only. Incorrect
configuration can lead to battery damage and risk of fire.
Consult the local utility before changing any Grid Support settings. Before changing XW
Inverter/Charger settings, you must be familiar with the settings and the system-wide
impact of changing those settings. Setting these parameters incorrectly could damage
connected equipment (such as batteries) or could severely affect the performance of your
system.
The XW Inverter/Charger Setup menu is accessible either from the System Home
screen or from the XW Inverter/Charger Home screen.
To navigate to the XW Inverter/Charger Setup menu:
1. From the System Home screen, press Enter to view the Select Device menu.
Go to step 2.
Or
From the XW Inverter/Charger Home screen, press Enter. The XW Inverter/
Charger Setup menu appears.
2. Highlight the XW Inverter/Charger device name, and press Enter.
XW6048 00: Setup
Meters
[Disabled]
[Disabled]
[Disabled]
[Operating]
Figure 3-1 XW Inverter/Charger Setup menu
[Enabled]
[Enabled]
[None]
Note: The System Control Panel displays only
four lines of the Setup menu at one time. To
view additional settings, press the Down
arrow button.
975-0240-01-01