Monitoring Operation With The Xw System Control Panel; Xw System Control Panel Features - Xantrex XW4024-120 Operation Manual

Monitoring Operation with the XW System Control Panel

XW System Control Panel Features

975-0240-01-01
The XW System Control Panel provides remote configuration and monitoring
capability for the XW Inverter/Charger and other Xanbus-enabled devices in the
power system.
You can monitor XW Inverter/Charger operation on the XW System Control
Panel using the:
• System Status screen (see page 2–11)
• XW Inverter/Charger Home screen (see page 2–11)
• XW Inverter/Charger Meters Menu (see page 2–14).
Fault/Warning
1
System Control Panel II
2
Feature Description
1
Fault/Warning light indicates a device has a fault or warning condition and
requires attention. The light flashes when a warning occurs, and turns on
steadily when a fault occurs.
2
Enter button confirms selection of a menu item or displays the next screen.
3
Up arrow button scrolls upwards through screen text or increases a selected
value.
4
Down arrow button scrolls downwards through screen text or decreases a
selected value.
5
Exit button cancels selection of a menu item or displays the previous screen.
6
Screen shows menus, settings, and system information.
7
Standby button disables inverting and charging on all XW Inverter/Chargers
in the system when pressed for one to two seconds. To enable inverting and
charging, press the Standby button again.
Monitoring Operation with the XW System Control Panel
7
Standby
6
3 4 5
2–7