Reading the System Status Screen
Reading the XW Inverter/Charger Home Screen
975-0240-01-01
Select Device menu
Select Device
XW6048
Select device from list
and press Enter to view
Device Setup menu
Figure 2-4 Selecting a Device Setup Menu
The System Status screen displays:
•
Qualified AC source (if applicable) and total power to and from the source
•
Battery voltage and capacity level
•
Net battery input or output current
•
Total inverter loading.
System Status
20.4A
115V
menu
"Menu" arrow indicates the Enter
button. Pressing Enter displays
the Select Device menu.
Figure 2-5 System Status Screen
The XW Inverter/Charger Home screen displays real-time operational data
specific to the XW Inverter/Charger. The XW Inverter/Charger status changes
according to the states described in Table 2-1 on page 2–12.
To view the XW Inverter/Charger Home screen:
u On the System Home screen, press the down arrow button until the XW
Inverter/Charger Home screen appears.
Monitoring Operation with the XW System Control Panel
XW Inverter/Charger
Setup menu
XW6048 00: Setup
Meters
53.9V
Line 1: Battery voltage and input/output current
E--F
Line 2: Battery level meter
1235W
Line 3: Power supplied to loads
3202W
Line 4: AC input source and line-to-neutral
voltage (averaged between L1 and L2). Bottom
left corner displays "AC1" or "AC2" depending on
the active input source. When selling to the grid,
the power displayed is negative.
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Bulk]
[Disabled]
[Operating]
2–11