Monitoring Inverter Status; Monitoring Charger Status; Monitoring Faults And Warnings - Xantrex XW4024-120 Operation Manual

Xw series hybrid inverter/charger
Table of Contents

Advertisement

Monitoring Inverter Status

Monitoring Charger Status

Monitoring Faults and Warnings

975-0240-01-01
Symbol
LED On
The AC source is present and AC
input is qualified. The XW Inverter/
Charger is ready to charge batteries
and pass power through to the
loads.
When one AC input LED is on and the other AC input LED is flashing, AC input
is present on both AC1 and AC2. However, the XW Inverter/Charger can qualify
and receive AC input from only one source at a time. The qualified source is
represented by the LED that is on. When two sources of AC input are present, the
XW Inverter/Charger uses the source selected under AC Priority on the System
Control Panel AC Settings menu. The AC sources connected to AC1 and AC2 can
be the utility grid and a generator, or two generators.
The green kW LED indicates the XW Inverter/Charger is inverting DC input to
AC output. When this LED is on or flashing, the display screen shows inverter
output power in kilowatts.
Symbol
The green A LED indicates the XW Inverter/Charger is charging the battery bank.
When this LED is on, the display screen shows battery charging current in amps.
Note:
When a charge cycle ends or charging is manually disabled, the XW Inverter/
Charger does not leave charge mode immediately, and the charging LED remains on for
60 seconds.
Symbol
The red Fault/Warning LED indicates the presence of a fault or warning in the
system. To clear active faults, press the On/Off button momentarily.
Monitoring Operation with the Inverter Information Panel
LED On
LED Flashing
The XW Inverter/
The XW Inverter/
Charger is inverting,
Charger is selling
and producing power
power to the grid.
for connected loads.
LED On
LED Off
The XW Inverter/
The XW Inverter/
Charger is charging
Charger is not
the batteries.
charging.
LED Flashing
LED Off
AC input is
AC input is not
present, within
present, or AC
nominal range
input is present
and is being
but not within
qualified.
nominal range.
LED Off
The XW Inverter/
Charger is not
inverting.
2–3

Advertisement

Table of Contents
loading

Table of Contents