Xantrex XW4024-120 Operation Manual page 31

975-0240-01-01
Appears for a few seconds after the system starts up
or when the system has been reset.
Startup screen
System Status
Press Enter to view
System
Select Device menu.
Status screen
XW6048:Home
XW
Inverter/Charger
Home screen
Device 2:Home
Device 2
Home screen
Press Enter from a Device Home screen
to view the Device Setup menu.
Device 3:Home
Device 3
Home screen
The number of Home screens depends on
the number of Xanbus-enabled devices
installed in the system.
Device n:Home
Device n
Home screen
Figure 2-3 System Control Panel
System Status Screen
The System Status screen appears after the Startup screen. The System Status
screen displays aggregated status information for the entire power system. For
example, a single system may have three Xanbus™ network-connected XW
Inverter/Chargers, two XW Solar Charge Controllers, one XW-Automatic
Generator Start module and one XW System Control Panel all connected to a
single battery bank, a single generator and a common utility grid.
The System Status screen always features a "Menu" arrow pointing to the Enter
button. Pressing Enter takes you to the Select Device menu. For more
information, see "Reading the System Status Screen" on page 2–11.
Important:
If you are uncertain which System Control Panel screen or menu you are
viewing, you can always return to the starting point—the System Status screen—by
pressing Exit repeatedly until the screens stop changing.
Monitoring Operation with the XW System Control Panel
Select Device
Select Device
menu
Screens
Top Level
Select device from list
and press Enter to view
Device Setup menu.
2–9