Important Safety Information; General Precautions; Explosive Gas Precautions - Xantrex PROwatt 3000 Owner's Manual

Important Safety Information

General Precautions

1. Before installing and using the inverter, read all appropriate sections
2. Do not operate the inverter if it has received a sharp blow, been
3. Do not dismantle the inverter; it contains no user-serviceable
4. To reduce the risk of electrical shock, disconnect AC and DC power
5. Do not expose the inverter to rain, snow, spray, or bilge water.
6. To reduce the risk of overheating or fire, do not obstruct the

Explosive Gas Precautions

1. Batteries generate explosive gases during normal operation. Be sure
2. This equipment contains components which tend to produce arcs or
WARNING
Before installing and using your PROwatt
sure to read and save these safety instructions.
of this guide as well as all instructions and cautionary markings on
the inverter and the batteries.
dropped, or otherwise damaged. If the unit is damaged, see
and System Information" on page D–1
Authorization Policy" on page
components. Attempting to service the unit yourself could cause
electrical shock or fire. Internal capacitors remain charged after
all power is disconnected.
from the inverter before working on any circuits connected to the
inverter. Turning off controls will not reduce this risk.
ventilation openings, and do not install the inverter in a zero-
clearance compartment.
to read this guide and follow the instructions exactly before
installing or using your inverter.
sparks. To prevent fire or explosion, do not install the inverter in
compartments containing batteries or flammable materials or in
™
and "Return Material
D–3.
3000 Inverter, be
"Product
xi