Braking system
- If you detect incorrect values, replace the disc. If the anomaly persists, replace the hub.
Front brake disc
Removal
- Remove the front wheel.
- Adequately support the front wheel and remove
the break disc operating on the five screws shown
in the photograph.
Refitting
- Perform the removal operations in the reverse
order according to the direction of rotation of the
disc, as shown by the arrow on the disc
- Tighten the 5 screws at the prescribed torque.
Locking torques (N*m)
Front brake disc mounting 5 ÷ 6 •
Disc Inspection
- Using a micrometer, check the disc thickness as
shown in the figure.
Characteristic
Standard thickness:
4 +02-01mm
BRAK SYS - 10
Nexus 500