Removing The Wheel Axle Bearings - Gilera Nexus 500 Workshop Manual

Nexus 500
- Support the hub cover using the column kit.
- Pull out the bearing using the special tool.
Specific tooling
020476Y Stud bolt set
001467Y006 Pliers to extract 20 mm bearings
001467Y007 Driver for OD 54 mm bearing

Removing the wheel axle bearings

- Take out the clip on the outside of the gearbox
cover.
- Support the hub cover using the column kit.
- Pull out the bearing using the special tool.
Specific tooling
020476Y Stud bolt set
020376Y Adaptor handle
020477Y Adaptor 37 mm
020483Y 30 mm guide
- Remove the oil guard using a screwdriver.
Engine
ENG - 21