Pump Bracket Overhaul - Gilera Nexus 500 Workshop Manual

Injection
N.B.
DO NOT BLOW THE FILTER WITH COMPRESSED AIR. A DAMAGED FILTER MAY CAUSE THE
INJECTOR CLOGGING.

Pump bracket overhaul

To remove the pump support from the tank, pro-
ceed as follows:
- Disconnect the electric connector.
- Start the engine and wait for the spontaneous
stop.
- Clean the tank and the pump support (wash and
blow with compressed air, if necessary).
- Disconnect the delivery and return pipes by the
quick unions.
CAUTION
PREVENT ANY FUEL SPRAYING.
- Loosen the pump support mounting ring nut (RH
threading).
- Remove the pump support and the sealing gas-
ket.
N.B.
WHEN EXTRACTING, BE CAREFUL NOT TO
DEFORM THE FLOATING ARM.
INJEC - 44
Nexus 500