Engine
- Check the deviation of the valve stem by resting
it on a "V" shaped abutment and measuring the
extent of the deformation with a comparator.
Characteristic
Limit values admitted:
0.1 mm
- Check the concentricity of the valve head by ar-
ranging a comparator at right angle relative to the
valve head and rotate it on a "V" shaped abutment.
Characteristic
Admissible limit:
0.03 mm
Inspecting the valve stem guide clearance
- After measuring the valve guide diameter and the valve stem diameter, check the clearance between
guide and stem.
Specification
Standard clearance:
Admissible limit:
Specification
Standard clearance:
Admissible limit:
ENG - 68
INLET
Desc./Quantity
0.013 - 0.04 mm
OUTLET
Desc./Quantity
0.025 ÷ 0.052 mm
Nexus 500
0.08 mm
0.09 mm