Knee-Guard - Gilera Nexus 500 Workshop Manual

Chassis
- Remove the front shield, disconnecting the wiring and the connectors of the headlights and lights.
Remove the 3 screws as shown in the figure.
- Paying attention not to damage the plastic parts,
release the 3 upper retainers of the windshield
support and the 4 side retainers of the front shield.

Knee-guard

- Remove the centre union.
- Remove the 4 lateral screws (2 on each side) in-
dicated in the figure.
- Press the shield back plate forward to allow ac-
cess to the socket on the frame of the key switch.
- Turn the frame in anticlockwise direction (it may
be necessary to use pliers), disengaging the lock-
ing teeth shown in the figure.
CHAS - 6
Nexus 500