Gilera Nexus 500 Workshop Manual page 295

Nexus 500
Suspensions
- Support the front wheel with two wooden shims
to prevent scratches in case of contact with the
rim.
- Insert the punch consisting of the adapter handle,
adapter and 15 mm guide on the odometer motion
drive side to allow removing the LH bearing and
the spacer bushing.
Specific tooling
020376Y Adaptor handle
020456Y Ø 24 mm adaptor
020412Y 15 mm guide
- Heat the LH bearing seat using the thermal gun.
- Insert the bearing by the punch consisting of
adapter handle, adapter 42x47 mm and 15-mm
guide to abutment.
- Reinsert the spacer bushing on the brake disc
side by the specific tool and move it to abutment.
Specific tooling
020376Y Adaptor handle
020359Y 42x47-mm adaptor
020412Y 15 mm guide
020201Y Spacer bushing driving tube
SUSP - 3