Removing The Intake Manifold; Removing The Rocker-Arms Cover; Removing The Timing System Drive - Gilera Nexus 500 Workshop Manual

Engine

Removing the intake manifold

- Remove the 3 mounting screws.
- Remove the intake manifold unit.

Removing the rocker-arms cover

- Loosen the 6 special screws with stop and the
relevant rubber gaskets.
- Remove the tappet cover with relevant gasket.

Removing the timing system drive

- Turn the engine to close the intake valves, i.e.,
moving the reference on the tone wheel to the top,
as shown in the figure.
ENG - 52
Nexus 500