Temperature Voltage - Gilera Nexus 500 Workshop Manual

Injection
Specific tooling
020481Y Control unit interface wiring
16 - Measure voltage at terminals 4 and 22;
1
2
3
4
5
6
YES go to 21 NO go to 17
17
Electric characteristic
Measured value =
5±0.2 V
Repeat the wiring and sensor continuity checks.
YES go to 18
18
Electric characteristic
Measured value =
0 V
Repeat the sensor and circuit earth insulation
check.
YES go to 19 NO go to 20
19 - Check the control unit connector.
Check the control unit power supply.
Replace the control unit, if necessary.
20 - Repair or replace the cable harness.
INJEC - 80

TEMPERATURE VOLTAGE

Specification
X V
X V
X V
X V
X V
X V
Nexus 500
Desc./Quantity
-10° C
0
+10° C
+20° C
+30° C
+80° C