Analogue Odometer; Remote Seat Opening; Battery Replacement - Gilera Nexus 500 Workshop Manual

Nexus 500

Analogue odometer

ANALOGUE ODOMETER
Specification
1
2
3
4

Remote seat opening

The vehicle is equipped with a remote control to open the saddle.
This remote control is supplied together with the keys and at the manufacturing stage, it has been
programmed to work together with the ECU that control the opening device.
If the remote control is lost, a new one can be requested and programmed, by resetting the ECU memory
and following the same steps as per programming the immobilizer system in the keys.

Battery replacement

The remote control for the black key is powered by
inner batteries that get discharged after extended
use.
You may need to replace the batteries if the re-
mote control fails or if its range of operation is
reduced.
To perform such operation remove the three
screws and open the two half shells.
Electric characteristic
Batteries used:
CR1616
Desc./Quantity
STEPPER MOTOR A
STEPPER MOTOR B
STEPPER MOTOR C
STEPPER MOTOR D
Electrical system
ELE SYS - 27