Switch Priority - Dell Catalyst 3130 Command Reference Manual

switch priority

switch priority
Use the switch priority global configuration command on the stack master to change the stack member
priority value.
Note This command is supported only on stacking-capable switches.
Syntax Description stack-member-number
priority new-priority-value
Defaults The default priority value is 1.
Command Modes Global configuration
Command History Release
12.2(40)EX1
Usage Guidelines The new priority value is a factor during a stack-master re-election. Therefore, changing the priority
value does not change the stack master immediately.
Examples This example shows how to change the priority value of stack member 6 to 9:
Switch(config)# switch 6 priority 9
Changing the Switch Priority of Switch Number 6 to 9
Do you want to continue?[confirm]
Related Commands Command
reload
session
switch renumber
show switch
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-764
switch stack-member-number priority new-priority-value
Modification
This command was introduced.
Description
Reloads the stack member and puts a configuration change into effect.
Accesses a specific stack member.
Changes the stack member number.
Displays information about the switch stack and its stack members.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Specify the current stack member number. The range is 1 to 9.
Specify the new stack member priority value. The range is 1 to 15.
OL-12248-03