Dell Catalyst 3130 Command Reference Manual page 64

Blade switch
Table of Contents

Advertisement

authentication order
Related Commands
Command
authentication
control-direction
authentication event
authentication
fallback
authentication
host-mode
authentication open
authentication
periodic
authentication
port-control
authentication
priority
authentication timer
authentication
violation
mab
mab eap
show authentication
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-34
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Description
Configures the port mode as unidirectional or bidirectional.
Sets the action for specific authentication events.
Configures a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
Sets the authorization manager mode on a port.
Enables or disables open access on a port.
Enables or disables reauthentication on a port.
Enables manual control of the port authorization state.
Adds an authentication method to the port-priority list.
Configures the timeout and reauthentication parameters for
an 802.1x-enabled port.
Configures the violation modes that occur when a new device connects to a
port or when a new device connects to a port after the maximum number of
devices are connected to that port.
Enables MAC authentication bypass on a port.
Configures a port to use Extensible Authentication Protocol (EAP).
Displays information about authentication manager events on the switch.
OL-13271-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3032

Table of Contents