Clear Port-Security - Dell Catalyst 3130 Command Reference Manual

Blade switch
Table of Contents

Advertisement

clear port-security

clear port-security
Use the clear port-security privileged EXEC command on the switch stack or on a standalone switch
to delete from the MAC address table all secure addresses or all secure addresses of a specific type
(configured, dynamic, or sticky) on the switch or on an interface.
Syntax Description
all
configured
dynamic
sticky
address mac-addr
interface interface-id
vlan
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Examples
This example shows how to clear all secure addresses from the MAC address table:
Switch# clear port-security all
This example shows how to remove a specific configured secure address from the MAC address table:
Switch# clear port-security configured address 0008.0070.0007
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-90
clear port-security {all | configured | dynamic | sticky} [[address mac-addr | interface
interface-id] [vlan {vlan-id | {access | voice}}]]
Delete all secure MAC addresses.
Delete configured secure MAC addresses.
Delete secure MAC addresses auto-learned by hardware.
Delete secure MAC addresses, either auto-learned or configured.
(Optional) Delete the specified dynamic secure MAC address.
(Optional) Delete all the dynamic secure MAC addresses on the specified
physical port or VLAN.
(Optional) Delete the specified secure MAC address from the specified
VLAN. Enter one of these options after you enter the vlan keyword:
Note
Modification
This command was introduced.
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
vlan-id—On a trunk port, specify the VLAN ID of the VLAN on which
this address should be cleared.
access—On an access port, clear the specified secure MAC address on
the access VLAN.
voice—On an access port, clear the specified secure MAC address on
the voice VLAN.
The voice keyword is supported only if voice VLAN is configured
on a port and if that port is not the access VLAN.
OL-13271-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3032

Table of Contents