Show Mac Address-Table Interface - Dell Catalyst 3130 Command Reference Manual

show mac address-table interface

show mac address-table interface
Use the show mac address-table interface user command to display the MAC address table information
for the specified interface in the specified VLAN.
Syntax Description interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(40)EX1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table interface command:
Switch> show mac address-table interface gigabitethernet6/0/2
------------------------------------------
Vlan
----
1
1
Total Mac Addresses for this criterion: 2
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-602
show mac address-table interface interface-id [vlan vlan-id] [ | {begin | exclude | include}
expression]
Specify an interface type; valid interfaces include physical ports and port
channels.
(Optional) Display entries for a specific VLAN; the range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0030.b635.7862 DYNAMIC Gi6/0/2
00b0.6496.2741 DYNAMIC Gi6/0/2
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Ports
-----
OL-12248-03