Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
This example show how to remove the DSCP-to-DSCP-mutation map name dscpmutation1 from the port
and to reset the map to the default:
Switch(config-if)# no mls qos dscp-mutation dscpmutation1
You can verify your settings by entering the show mls qos maps privileged EXEC command.
Related Commands
Command
mls qos map
mls qos trust
show mls qos maps
OL-13271-03
Description
dscp-mutation
Defines the DSCP-to-DSCP-mutation map.
Configures the port trust state.
Displays QoS mapping information.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
mls qos dscp-mutation
2-333