Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples
This example shows how to define an ARP access list and to permit both ARP requests and ARP
responses from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:
Switch(config)# arp access-list static-hosts
Switch(config-arp-nacl)# permit ip host 1.1.1.1 mac host 00001.0000.abcd
Switch(config-arp-nacl)# end
You can verify your settings by entering the show arp access-list privileged EXEC command.
Related Commands
Command
deny (ARP access-list
configuration)
ip arp inspection filter
vlan
permit (ARP
access-list
configuration)
show arp access-list
OL-13271-03
Description
Denies an ARP packet based on matches compared against the DHCP
bindings.
Permits ARP requests and responses from a host configured with a static IP
address.
Permits an ARP packet based on matches compared against the DHCP
bindings.
Displays detailed information about ARP access lists.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
arp access-list
2-21
Advertisement
Table of Contents
