Energywise (Global Configuration) - Dell Catalyst 3130 Command Reference Manual

energywise (global configuration)

energywise (global configuration)
Use the energywise global configuration command to enable and configure EnergyWise on an entity.
Use the no form of this command to disable EnergyWise and to remove the EnergyWise configuration.
Syntax Description
importance importance Set the importance of the entity.
keywords word,word,... Assign at least one keyword for the entity.
level level
management
udp-port-number
name name
neighbor [hostname|
ip-address]
udp-port-number
role role
Defaults EnergyWise is disabled.
The importance is 1.
No keywords are defined.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-152
energywise {importance importance | keywords word,word,... | level level | management
udp-port-number | name name | neighbor [hostname| ip-address] udp-port-number | role role}
no energywise {importance | keywords | management | name | neighbor | role}
The range is from 1 to 100.
When assigning multiple keywords, separate the keywords with commas,
and do not use spaces between keywords.
•
•
Set the power level of the entity.
The range is from 1 to 10.
Specify the UDP port that sends and receives queries.
The range is from 1 to 65000.
Specify the EnergyWise-specific entity name.
•
•
Assign a static neighbor:
•
•
Specify the role of the entity in the EnergyWise domain. For example,
lobby.b20.
•
•
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
Do not use an asterisk (*) or a blank space between the characters and
symbols.
You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
Do not use an asterisk (*) or a blank space between the characters and
symbols.
(Optional) Hostname (hostname) or IP address (ip-address).
UDP port (udp-port-number) that sends and receives queries.
The range is from 1 to 65000.
You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
Do not use an asterisk (*) or a blank space between the characters and
symbols.
OL-13271-03