Dell Catalyst 3130 Command Reference Manual page 716

show vtp
Table 2-38
Field
Number of V1 summary
errors
Join Transmitted
Join Received
Summary Advts Received
from non-pruning-capable
device
This is an example of output from the show vtp status command.
display.
Switch> show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
Table 2-39
Field
VTP Version
Configuration Revision
Maximum VLANs
Supported Locally
Number of Existing
VLANs
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-686
show vtp counters Field Descriptions (continued)
Description
Number of Version 1 errors.
Version 1 summary errors increment whenever a switch in VTP V2 mode
receives a VTP Version 1 frame. These errors mean that at least one
neighboring switch is either running VTP Version 1 or VTP Version 2
with V2-mode disabled. To solve this problem, change the configuration
of the switches in VTP V2-mode to disabled.
Number of VTP pruning messages sent on the trunk.
Number of VTP pruning messages received on the trunk.
Number of VTP summary messages received on the trunk from devices
that do not support pruning.
: 2
: 0
: 45
: Transparent
: shared_testbed1
: Disabled
: Disabled
: Enabled
: 0x3A 0x29 0x86 0x39 0xB4 0x5D 0x58 0xD7
show vtp status Field Descriptions
Description
Displays the VTP version operating on the switch. By default, the switch
implements Version 1 but can be set to Version 2.
Current configuration revision number on this switch.
Maximum number of VLANs supported locally.
Number of existing VLANs.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Table 2-39 describes each field in the
OL-12248-03