Table of Contents
Advertisement
Appendix B
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform acl
Use the debug platform acl privileged EXEC command to enable debugging of the access control list
(ACL) manager. Use the no form of this command to disable debugging.
Syntax Description
all
exit
label
main
racl
stack
vacl
vlmap
warn
Note
Though visible in the command-line help strings, the stack keyword is not supported on
nonstacking-capable switches.
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
The undebug platform acl command is the same as the no debug platform acl command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
OL-13271-03
debug platform acl {all | exit | label | main | racl | stack | vacl | vlmap | warn}
no debug platform acl {all | exit | label | main | racl | stack | vacl | vlmap | warn}
Display all ACL manager debug messages.
Display ACL exit-related debug messages.
Display ACL label-related debug messages.
Display the main or important ACL debug messages.
Display router ACL related debug messages.
Display ACL stack-related debug messages.
This keyword is supported only on stacking-capable switches.
Display VLAN ACL-related debug messages.
Display ACL VLAN-map-related debug messages.
Display ACL warning-related debug messages.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
debug platform acl
B-27
Advertisement
Table of Contents
