Table of Contents
Advertisement
debug platform cisp
debug platform cisp
Use the debug platform cisp global configuration command to enable platform-level debugging of a
switch that has one or more Client Information Signalling Protocol (CISP)-enabled interfaces. Use the
no form of this command to disable debugging.
Syntax Description
initialization
interface-configuration
rpc
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(50)SE
Usage Guidelines
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, start a session from the stack master by using the session switch-number privileged EXEC
command and enter enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number <line> privileged EXEC command on the
stack master switch to enable debugging on a member switch without first starting a session.
Related Commands
Command
cisp enable
dot1x credentials (global
show cisp
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
B-30
debug platform cisp [initialization | interface-configuration | rpc]
no debug platform cisp [initialization | interface-configuration | rpc]
Modification
This command was introduced.
configuration)profile Configures a profile on a supplicant switch.
Appendix B
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
Enable debugging of the CISP initialization sequence.
Enable debugging of the CISP configuration.
Enable debugging of the CISP RPC requests.
Description
Enables Client Information Signalling Protocol
(CISP)
Displays CISP information for a specified
interface.
OL-13271-03
Advertisement
Table of Contents
