Debug Dot1X - Dell Catalyst 3130 Command Reference Manual

debug dot1x

debug dot1x
Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x authentication
feature. Use the no form of this command to disable debugging.
Syntax Description
all
errors
events
feature
packets
registry
state-machine
Though visible in the command-line help strings, the redundancy keyword is not supported.
Note
Command Default Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(40)EX1
Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands Command
show debugging
show dot1x
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
B-6
debug dot1x {all | errors | events | feature | packets | registry | state-machine}
no debug dot1x {all | errors | events | feature | packets | registry | state-machine}
Display all IEEE 802.1x authentication debug messages.
Display IEEE 802.1x error debug messages.
Display IEEE 802.1x event debug messages.
Display IEEE 802.1x feature debug messages.
Display IEEE 802.1x packet debug messages.
Display IEEE 802.1x registry invocation debug messages.
Display state-machine related-events debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays IEEE 802.1xstatistics, administrative status, and operational status
for the switch or for the specified port.
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
OL-13271-03