Boot Auto-Download-Sw - Dell Catalyst 3130 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands

boot auto-download-sw

Use the boot auto-download-sw global configuration command on the switch stack to specify a URL
pathname to use for the automatic software upgrades. Use the no form of this command to remove the
software image.
This command is supported only on stacking-capable switches.
Note
Syntax Description
source-url
Defaults Disabled.
Command Modes
Global configuration
OL-13271-03
boot auto-download-sw source-url
no boot auto-download-sw
The source URLs for the software images. The image-name.tar is the
software image to download and install on the switch.
These options are supported:
•
•
•
•
•
•
•
Local flash file system syntax on the standalone switch or the stack
master:
flash:
Local flash file system syntax on a stack member:
flash member number:
The member number can be from 1 to 9.
FTP syntax:
ftp:[[//username[:password]@location]/directory]/image-name.tar
HTTP server syntax for an HTTP server:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Secure HTTP server syntax:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Remote Copy Protocol (RCP) syntax:
rcp:[[//username@location]/directory]/image-name.tar
Secure Copy Protocol (SCP) syntax:
scp:[[//username@location]/directory]/image-name.tar
TFTP syntax:
tftp:[[//location]/directory]/image-name.tar
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
boot auto-download-sw
2-51