Changing The Default Cisco Rv220W Ip Address - Cisco Small Business RV220W Administration Manual

Configuring Networking
Configuring the LAN
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV220W Administration Guide

Changing the Default Cisco RV220W IP Address

Choose Networking > LAN > LAN Configuration.
In the IP address field, enter the new IP address for your Cisco RV220W. The
default IP address is 192. 1 68. 1 . 1 . You might want to change the default IP address if
that address is assigned to another piece of equipment in your network.
Enter the Subnet Mask for the new IP address.
Click Save. After changing the IP address, you are no longer connected to the
Cisco RV220W. You must do one of the following:
• Release and renew the IP address on the PC that you are using to access
the Cisco RV220W (if DHCP is configured on the RV220W).
• Manually assign an IP address to your PC that is in the same subnet as the
Cisco RV220W. For example, if you change the Cisco RV220W IP address
to 10.0.0. 1 , you would assign an IP address in the 10.0.0.0 subnet to your PC.
Open a new browser window and enter the new IP address of the Cisco RV220W
to re-connect.
2
37