Configuring Virtual Private Networks and Security
Configuring VPNs
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco RV220W Administration Guide
Configuring IPsec Users
The configured IPsec users (both XAUTH and QuickVPN) are listed in the List of
Users viewed by choosing VPN > IPsec > IPsec Users. The VPN gateway
authenticates users in this list when XAUTH is used in an IKE policy. QuickVPN
client can access only default LAN hosts.
To add new users:
Click Add.
Enter the username, or the unique identifier for the XAUTH user.
In the User Type field, select the type of the Remote Peer: Standard IPsec (XAuth),
or Cisco QuickVPN.
If you chose QuickVPN, you can check the Enable box next to Allow User to
Change Password box to allow the QuickVPN user to change their password.
Uncheck if you would like to maintain the password for them.
Enter the alphanumeric password for this user
Enter the password again to confirm.
Click Save.
.
5
118