Configuring Users - Cisco Small Business RV220W Administration Manual

Administering Your Cisco RV220W
Configuring User Accounts
!
CAUTION
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
NOTE
STEP 7
STEP 8
STEP 9
STEP 10
Cisco RV220W Administration Guide

Configuring Users

Change the administrator name and password as soon as possible.
To add more user accounts, or edit user accounts:
Choose Administration > Users > Users.
Click Add to add a new user account, or check the box next to the existing account
you want to change and press Edit.
Enter the username.
Enter the first and last name.
Select the user type:
• SSL VPN User—An SSL VPN user can log in to the network using the VPN
client.
• Administrator—An administrator user type has access to the Device
Manager and can read and write configuration data.
• Guest—A guest account has read-only access to the Device Manager.
Select the user group. See
Certain fields, like the password and idle timeout value, are configured on the user
page. However, a group can also have these fields configured. If the user belongs
to a group, the group configuration applies and the individual user values are
ignored.
Enter the password.
Enter the password again to confirm it.
In the Idle Timeout field, enter the number, in minutes, before a session times out
due to inactivity. The Device Manager, by default, logs you out after 10 minutes of
inactivity.
Press Save.
"Configuring Groups" section on page
7
142.
143