Introduction
Attaching the Antennas
Attaching the Antennas
STEP 1
STEP 2
STEP 3
STEP 4
Connecting the Equipment
Cisco RV220W Administration Guide
The RV220W ships with two removable dual-band antennas.
To attach an external antenna:
Hold the antenna perpendicular to the round screw hole on the back of the unit.
Screw the antenna clockwise until it is firmly secured to the RV220W.
Repeat these steps to secure the second antenna.
Put the antennas in the "V" orientation.
Before you begin the installation, make sure that you have the following equipment
and services:
Required
•
Functional Internet Connection (Broadband DSL or cable modem).
•
Ethernet cable for WAN (Internet) connection.
•
PC with functional network adapter (Ethernet connection) to run the Device
Manager. The Device Manager is supported on the following web browsers:
-
Microsoft Internet Explorer 6.0 or later
-
Mozilla Firefox 3.0 or later
-
Apple Safari 3.0 or later
•
Ethernet cable (provided) to connect the PC to the RV220W for
configuration.
Optional
•
Uninterruptible Power Supply (UPS) to provide backup power to essential
devices (strongly recommended).
•
Ethernet cables for LAN interfaces, if you want to connect additional
devices.
1
16