Configuring The Rv220W - Cisco Small Business RV220W Administration Manual

Introduction

Configuring the RV220W

STEP 4
!
CAUTION
STEP 5
STEP 6
Configuring the RV220W
Cisco RV220W Administration Guide
Connect the power adapter to the RV220W Power port.
Use only the power adapter (12V, 1A) that is supplied with the unit. Using a different
power adapter could damage the unit.
Plug the other end of the adapter into an electrical outlet. You may need to use a
specific plug (supplied) for your country.
On the RV220W, push the power button to the on position to turn on the RV220W.
The POWER light on the front panel is green when the power adapter is
connected properly and the unit is turned on.
After connecting your equipment, use the web-based Device Manager to
configure your RV220W. The Cisco RV220W tries to automatically detect and
configure your Internet settings. However, in some cases you might need to
manually configure some settings using the Device Manager.
You should also, at a minimum, change the default administrator name and
password, and set up wireless security.
1
18