Viewing the RV220W Status
Viewing the System Summary
Viewing the System Summary
Cisco RV220W Administration Guide
To view a summary of system information, choose Status > System Summary.
Click Refresh to obtain the latest information.
The System Summary window displays the following:
•
System Name—Name of the device.
•
Firmware Version—Current software version the device is running.
•
Firmware MD5 Checksum—The message-digest algorithm used to verify
the integrity of files.
•
PID VID—Product ID and vendor ID of the device.
•
Serial Number—RV220W serial number.
ProtectLink License Info
Contains licensing information for Cisco ProtectLink Web.
LAN Information
•
MAC Address—Hardware address.
•
IPv4 Address—Address and subnet mask of the device.
•
IPv6 Address—Address and subnet mask of the device (shown only if IPv6
is enabled).
•
DHCP Server—Indicates whether the device's DHCP server is enabled or
disabled. If it is enabled, DHCP client machines connected to the LAN port
receive their IP address dynamically.
•
DHCP Relay—Indicates whether the device is acting as a DHCP relay
(DHCP relay must be enabled).
•
DHCPv6 Server—Indicates whether the device's DHCPv6 server is enabled
or disabled. If it is enabled, DHCPv6 client machines connected to the LAN
port receive their IP address dynamically.
•
DHCPv6 Server—Indicates whether the device's DHCPv6 server is enabled
or disabled. If it is enabled, DHCP client machines connected to the LAN
port receive their IP address dynamically.
8
160