Configuring The Lan Settings; Changing The Device Management Ip Address - Cisco RV215W Administration Manual

Configuring Networking

Configuring the LAN Settings

STEP 4
Configuring the LAN Settings
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Connect the USB dongle to the device.
The default DHCP and TCP/IP settings work for most applications. If you want
another PC on your network to be the DHCP server, or if you want to manually
configure the network settings of all of your devices, disable DHCP.
Also, instead of using a DNS server that maps Internet domain names (for example,
www.cisco.com) to IP addresses, you can use a Windows Internet Naming Service
(WINS) server. A WINS server is the equivalent of a DNS server, but uses the
NetBIOS protocol to resolve hostnames. The device includes the IP address of the
WINS server in the DHCP configuration that the device sends to DHCP clients.
If the device is connected to a modem or device that has a configured network on
the same subnet (192.168.1.x), the device automatically changes the LAN subnet
to a random subnet based on 10.x.x.x, so there is no conflict with the subnet on the
WAN side of the device.

Changing the Device Management IP Address

The local device management IP address of the device is static and defaults to
192.168.1.1.
To change the local device management IP address:
Choose Networking > LAN > LAN Configuration.
In the IPv4 section, enter this information:
VLAN
Local IP Address
Subnet mask
Click Save.
The VLAN number.
Local LAN IP address of the device. Ensure that this
IP address is not in use by another device.
Subnet mask for the local IP address. The default
subnet mask is 255.255.255.0.
6
38