Viewing The Ipsec Connection Status - Cisco Small Business RV220W Administration Manual

Viewing the RV220W Status

Viewing the IPsec Connection Status

Viewing the IPsec Connection Status

Cisco RV220W Administration Guide
To view the status of IPsec connections, choose Status > IPsec Connection. Click
Refresh to obtain the latest information.
The IPsec Connection Status window displays the status of IPSec connections.
You can change the status of a connection to either establish or disconnect the
configured SAs (Security Associations).
• Policy Name—The name of the IKE or VPN policy associated with this SA.
• Endpoint—Displays the IP address of the remote VPN gateway or client.
• Tx KB—The data transmitted (in KB) over this SA.
• Tx Packets—The number of IP packets transmitted over this SA.
• State—The current status of the SA for IKE policies. The status can be Not
Connected or IPsec SA Established.
Click Connect to establish an inactive SA (connection) or Drop to terminate an
active SA (connection).
The page refreshes automatically to display the most current status for an SA. To
change the refresh settings, in the Poll Interval field, enter a value in seconds for
the poll interval. This causes the page to re-read the statistics from the router and
refresh the page automatically. To modify the poll interval, click the Stop button
and click Start to restart automatic refresh.
8
165