Configuring Virtual Private Networks and Security
Configuring VPNs
STEP 9
STEP 10
Cisco RV220W Administration Guide
Configure the Secure Connection Accessibility details:
•
Remote Network IP address (available if you chose Gateway in Step 2)
•
Remote Network Subnet Mask (available only if you chose Gateway in
Step 2)
•
Local Network IP Address
•
Local Network Subnet Mask
The IP address range used on the remote network must be different
NOTE
from the IP address range used on the local network.
Click Save.
Viewing the Default Values
You can also view the default values created by the VPN Wizard by choosing
VPN > IPsec > Default Settings.
Configuring IP Security Policies
The VPN Wizard is the recommended method to configure corresponding Internet
Key Exchange (IKE) and VPN policies for establishing a VPN tunnel. Once the
Wizard creates the matching IKE and VPN policies, you can modify the required
fields using the Edit button. Advanced users can create an IKE policy from the Add
button, but must be sure to use compatible encryption, authentication, and key-
group parameters for the VPN policy.
5
107