Configuring Groups - Cisco Small Business RV220W Administration Manual

Administering Your Cisco RV220W
Configuring User Accounts
STEP 10
STEP 11
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco RV220W Administration Guide
If you chose Active Directory authentication in Step 4, enter the Active Directory
domain name. Users that are registered in the Active Directory database can
access the SSL VPN portal using their Active Directory username and password.
Click Save.

Configuring Groups

To configure groups to which SSL VPN users can be added:
Choose Administration > Users > Groups.
Click Add.
Enter the group name, or the unique identifier for the group.
Select the authenticating domain to which the group is attached.
Enter the idle Timeout value. This is the time, in minutes, after which a user in the
group is logged out of the VPN.
Click Save.
7
142