Viewing Port Statistics - Cisco Small Business RV220W Administration Manual

Viewing the RV220W Status

Viewing Port Statistics

Viewing Port Statistics

Cisco RV220W Administration Guide
• Rx B/s—The number of bytes received by the interface per second.
• Uptime—The duration for which the interface has been active. The uptime
will be reset to zero when the RV220W or the interface is restarted.
Poll Interval—Enter a value in seconds for the poll interval. This causes the page to
re-read the statistics from the RV220W and refresh the page automatically. To
modify the poll interval, click the Stop button and then Start to restart automatic
refresh.
To view port statistics, choose Status > Port Statistics. Click Refresh to obtain the
latest information. This Port Statistics window displays the data transfer statistics
for the Dedicated WAN, LAN, and WLAN ports, including the duration for which
they were enabled. The following data is displayed:
• Tx Packets—The number of IP packets going out of the port.
• Rx Packets—The number of packets received by the port.
• Collisions—The number of signal collisions that have occurred on this port.
A collision occurs when the port tries to send data at the same time as a
port on another router or computer that is connected to this port.
• Tx B/s—The number of bytes going out of the port per second.
• Rx B/s—The number of bytes received by the port per second.
• Uptime—The duration for which the port has been active. The uptime is
reset to zero when the router or the port is restarted.
Poll Interval—Enter a value in seconds for the poll interval. This causes the page to
re-read the statistics from the RV220W and refresh the page automatically. To
modify the poll interval, click the Stop button and then Start to restart automatic
refresh.
8
169