Introduction
Mounting the Cisco RV220W
Mounting the Cisco RV220W
WARNING
Cisco RV220W Administration Guide
You can place your Cisco RV220W on a desktop or mount it on a wall.
Placement Tips
•
Ambient Temperature—To prevent the RV220W from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F (40°C).
•
Air Flow—Be sure that there is adequate air flow around the RV220W.
•
Mechanical Loading—Be sure that the RV220W is level and stable to avoid
any hazardous conditions.
For desktop placement, place the RV220W horizontally on a flat surface so that it
sits on its four rubber feet.
Wall Mounting
The RV220W can be wall-mounted. You will need the following (not supplied):
•
2 screws as defined below
•
2 drywall anchors (if installing onto drywall)
The dimensions for these parts are as follows:
1
2
1 0.30 to 0.32 in
2 0.86 to 0.88 in
7.7 to 8.2 mm
21.8 to 22.3 mm
Insecure mounting might damage the device or cause injury. Cisco is not
responsible for damages incurred by insecure wall-mounting.
3
4
3 0.26 to 0.28 in
6.5 to 7. 1 mm
4 0.61 to 0.63 in
15.5 to 16 mm
1
13