Back Panel - Cisco Small Business RV220W Administration Manual

Introduction
Getting to Know the Cisco RV220W
Cisco RV220W Administration Guide

Back Panel

RESET Button—The RESET button has two functions:
• If the RV220W has problems connecting to the Internet, press the RESET
button for at least 3 seconds but no more than 10 seconds with a paper clip
or a pencil tip. This is similar to pressing the reset button on your PC to
reboot it.
• If you experience problems with the RV220W and have tried all other
troubleshooting measures, press and hold in the RESET button for more
than 10 seconds. This reboots the unit and restores the factory defaults.
Changes that you have made to the RV220W settings are lost.
WAN Port—The WAN port is connected to your Internet device, such as a cable
or DSL modem.
LAN Ports (1-4)—These ports provide a LAN connection to network devices,
such as PCs, print servers, or switches.
Power Port—The power port is where you connect the provided power adapter.
Power Switch—Press this button up (toward the line) to turn the device on. Press
this button down (toward the circle) to turn the device off.
1
12