Configuring Approved Clients - Cisco Small Business RV220W Administration Manual

Configuring the Firewall
Using Cisco ProtectLink Web
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Cisco RV220W Administration Guide

Configuring Approved Clients

To configure approved clients, or computers that have unrestricted Internet
access:
Choose Cisco ProtectLink Web > Global Settings > Approved Clients.
Next to Approved Clients List, check the Enable check box to always approve all
URL requests from computers listed in the Approved Clients Table.
Click Save.
In the Approved Clients Table, click Add.
In the Approved Clients window:
a. In the IP Address Type field, choose the address type.
This field allows you to specify whether to add a single client or a range of
clients to the Approved Client IP Addresses list.
b. If adding an IP address, in the Starting IP Address field, enter the IP address of
the approved client.
c. If adding a range of IP addresses, enter the IP address of the first client in the
range in the Starting IP Address field. In the Ending IP Address field, enter the
IP address of the last client in the range.
d. Click Save.
To configure a client in the Approved Clients Table, check the corresponding
check box and click Edit.
Edit the client settings as described in Step 5.
To delete a client from the Approved Clients Table, check the corresponding check
box and click Delete.
4
100