Administering Your Cisco RV220W
Configuring Simple Network Management
Configuring Simple Network Management
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV220W Administration Guide
Simple Network Management Protocol (SNMP) lets you monitor and manage your
router from an SNMP manager. SNMP provides a remote means to monitor and
control network devices, and to manage configurations, statistics collection,
performance, and security.
To configure SNMP, choose Administration > Network Management.
Editing SNMPv3 Users
SNMPv3 parameters can be configured for the two default RV220W user
accounts (Admin and Guest). To configure:
Choose Administration > Network Management > SNMP.
In the SNMPv3 Users List Table, check the box for the user to edit and click Edit.
Under Security Level, choose the amount of SNMPv3 Privileges:
•
NoAuthNoPriv—Doesn't require any Authentication and Privacy.
•
AuthNoPriv—Submit only Authentication algorithm and password.
•
AuthPriv—Submit Authentication/privacy algorithm and password.
If you chose AuthNoPriv or AuthPriv, choose the type of authentication algorithm
(MD5 or SHA) and enter the authentication password.
If you chose AuthPriv, choose the type of privacy algorithm (DES or AES) and enter
the privacy password.
Click Save.
7
144