Step 10: Selecting A Title - Solid State Logic Matrix 2 Owner's Manual

Chapter 2 - Getting Started
STEP 10:
For the final two steps in this tutorial (this tutorial goes up to eleven...), we will introduce the Projects system which allows you
to manage the way in which Matrix is configured for a particular recording, using the Matrix Remote. There are six tabs in the
Remote, the first of which (Projects) will be examined in this step, and the fourth of which
in Step 11. For the Total
see Chapter 4, and for the
A Project is simply a folder of recordings which are grouped together on whichever basis you choose, and a Title is a specific
recording within that Project. For example, the Titles might refer to different tracks within an album, and the Project might refer
to the album as a whole. All settings created within the
Title and therefore different Titles within a Project can have completely different settings. It is therefore essential that whenever
you change any of the settings in and of these tabs, you make sure you are editing the correct Title.
The left half of the Projects
Title:
‰ Double-click on the main
‰ Double-click on Project 1
‰ Highlight the Title 1
1 the Current Title - in other words it becomes the Title under which any configuration within the
and Insert Matrix
You will notice that Project 1 and Title 1 are listed as the
window as well as in the
You are now ready to start configuring Matrix for
Matrix 2 Owner's Manual
26
Selecting a Title
Recall, Channels and
DAW tab see Chapter 6.
tab contains the main Projects folder. Matrix comes with one Project, which in turn contains one
Projects folder to expand it.
to expand the Project.
folder which appears and press the
tabs is stored.
Notes section of the tab, as shown above.
About tabs along with more detail on the
Total Recall, Channels
Open Title button at the bottom of the screen. This makes
Current Project
Title 1.
(Insert Matrix) will be examined
Projects
and Insert Matrix
Total
and Current Title at the top and bottom of the
and Insert Matrix tabs,
tabs are specific to their
Title
Recall, Channels