Solid State Logic Matrix 2 Owner's Manual page 70

Chapter 4 - Matrix Remote
Setting a TR Snapshot
Once Total Recall has been enabled and a snapshot has been selected, 'Setting' the snapshot will reset all the automatically
resettable switches and faders (Group 1 on the following page).
Note that the console will still indicate those settings which require manual resetting (Groups 2 and 3) as was activated by
the initial selection of the snapshot.
There are two options for Setting a TR snapshot:
Pressing Set TR to All Chans
Pressing Set TR to Chan
to specific channels without resetting the whole desk:
Select the channels which you want to reset, and press the
be reset.
Note that all functions concerned with Setting the currently selected TR Snapshot can be accessed directly from the Matrix
front panel via the TR set of SSL soft keys – see Page 44.
Matrix 2 Owner's Manual
62
resets all the automatic resets for the whole desk.
brings up the following pop-up which allows you to recall all the settings within the snapshot related
OK button. All the automatic resets within those channels will now